Duct Leakage Test in Haddon township, NJ

Make sure your HVAC system performs at its best and satisfies local energy standards with certified duct leakage test in Haddon township, NJ. Our certified technicians identify and measure air leaks in ductwork to help homeowners and builders improve comfort, reduce energy waste, and achieve compliance with state requirements.

Why Duct Leakage Test is Important In Haddon township, NJ

In most states and municipalities, the 2015 IECC, International Energy Conservation Code is required for single-family homes, while the 2018 International Energy Conservation Code is required for multi-family homes. The change will result in significant implications for home builders and HVAC contractors doing business in the state. A Duct Leakage Test along with a Blower Door Test is now required for any newly constructed or remodeled home as outlined in the 2015 regulations. Did you know that ducts are a leading factor in home air leakage across Pennsylvania, New Jersey, and Delaware? Leaked air can increase monthly energy costs, stress your HVAC system, and scatter dust and insulation across your living areas. This makes duct leakage test essential for both new and older homes. Continue reading to understand why duct leakage test matters and how it can benefit you.

888 213-3975

What Our Clients Say

How a Duct Leakage Test Is Conducted

To begin a duct leakage test in Haddon township, NJ, your technician will seal off all supply and return registers except for the main return or the air handler. A specially calibrated duct blaster is then installed onto the opening. The fan lowers the pressure inside the ducts, helping reveal any leakage points.

The duct blaster works in sync with a precision pressure sensor to assess airflow and find duct leaks without disturbing your living space. A duct leakage test — sometimes labeled as a duct blaster test — finds where your ducts are leaking air so you can decide on the best sealing strategy.

duct leakage test is quick, low-impact, and does not disturb residents. Most tests in Haddon township, NJ require only 30 to 60 minutes, yet the upgrades can improve your home’s comfort and efficiency well into the future.

How to Measure Duct Leakage

Duct leakage is rated in cubic feet per minute (CFM) per 100 square feet of the home’s conditioned zone. Your technician uses a nanometer to measure tiny pressure changes, revealing how much air is escaping through the ducts. Understanding this number helps you detect inefficiencies, assess needed upgrades, and ensure your home complies with local energy code requirements in Haddon township, NJ.

Cost of Excessive Duct Leakage

If you’re encountering increased energy bills, temperature inconsistencies, or constant HVAC repairs, duct leakage could be the source. According to ENERGY STAR, the average home loses 20% to 30% of conditioned air through leaky ducts. If hot or cold air from outdoors enters your system, your HVAC works harder than necessary, causing energy costs to rise and comfort to fall.

Overworked equipment also leads to more breakdowns and costly repairs. Proper duct sealing helps safeguard the long-term reliability of your HVAC system, extending its lifespan and reducing how often maintenance is needed.

Duct leaks can also permit dust, mold spores, extra moisture, and other airborne contaminants into the duct system. This can increase allergy discomfort, degrade indoor air quality, and eventually cause expensive structural issues behind walls or ceilings.

How to Properly Seal Ductwork in an Old Home

The 2015 IRC/IECC requires that all new homes feature fully sealed duct systems utilizing updated, energy-efficient materials like mastic, foil tape, and insulation. But what if those leaks are tucked away behind walls or ceilings?

Aerosol sealing technology (AeroSeal) can identify and seal leaks that lie deep inside ductwork. To execute this method, all vents are sealed shut except a single access point. The HVAC system is isolated, and a machine is attached to the duct network. It pressurizes the ducts and distributes an ultra-fine aerosol sealant to fill small gaps and holes that manual sealing methods can’t access.

This method provides strong results for small and medium leaks. However, significant openings may still require mastic and tape by hand. Technicians test the ducts for leakage before and after aerosol sealing to determine the reduction level and verify success.

Common Areas of Duct Leakage

The most common place for ducts to leak air is through the joints. Ductwork is made of multiple metal pieces pressed together using tight fittings and metal bands, but these connections are rarely airtight.

As your HVAC system changes between heating and cooling during the year, the ducts naturally expand and shrink. Over time, this movement allows the joints to loosen, producing gaps and leaks — which is why a duct leakage test is suggested for homes of all ages in Haddon township, NJ.

Many energy auditors evaluate duct leakage by feeling around the duct system and using a small tool to check the size of joint gaps. If your duct system does not include sealing with mastic and approved tape, leakage is highly likely.

What Is an Acceptable Amount of Duct Leakage per Energy Code?

To achieve a passing duct leakage result, your system must show under 4 CFM per 100 square feet if the air handler is installed, or 3 CFM per 100 square feet if it is not. For new construction, a passing duct leakage test is essential before the home can qualify for an occupancy certificate.

If your home in Haddon township, NJ does not meet duct leakage standards, you are likely overpaying for heating and cooling — and adding unnecessary strain to your HVAC equipment. Meeting the 3–4 CFM requirement is significant not only for meeting local code but also for maintaining optimal comfort and efficiency in your home.

Your technician will also provide skilled recommendations to resolve leakage problems so you can reach a passing score, decrease energy costs, and improve home performance.

Local Energy Audits — affordable duct leakage test in Haddon township, NJ

Local Energy Audits proudly serves customers throughout Haddon township, NJ and surrounding areas. We specialize in identifying duct leakage and energy inefficiencies using blower door tests and duct leakage tests. Whether you’re building a new home or improving an existing one, we’re here to help.
If you’d like to book a test, call us during business hours or contact us online to request an appointment.

The Duct Leakage Test Steps Explained

A duct leakage test begins with all the ducts and registers sealed tightly using duct mask tape on both sides—supply and return.

After the registers are sealed, we link the duct tester to the unit or to one main return.

The ducts are then depressurized to exactly 25 Pascals. Once this is achieved, the nanometer is used to read the duct leakage.

Schedule Your Duct Leakage Test in Haddon township, NJ

Ensure your HVAC system maintains strong efficiency, meets code requirements, and performs reliably with trusted duct leakage test in Haddon township, NJ. Whether you’re a homeowner boosting comfort or a contractor finalizing an inspection, our certified team delivers fast, accurate, and affordable testing.

We use industry-standard duct blaster equipment and deliver on-site guidance to help you pass your test, limit energy waste, and preserve your HVAC system’s long-term health.

📞 Call 888-213-3975 ✉️ Request a Quote

Serving homeowners, builders, and contractors across Haddon township, NJ with dependable and energy-efficient testing solutions.