Duct Leakage Test in Perkiomenville, PA

How a Duct Leakage Test Is Conducted

To begin performing a duct leakage test in Perkiomenville, PA, your technician closes off all supply and return registers except the main return or air handler system. A duct blaster — a specially calibrated fan — is then connected to the opening. It depressurizes the duct system to expose areas where air is leaking.

The duct blaster uses its precision pressure sensor partner to measure airflow and uncover duct leaks without causing any home disruption. A duct leakage test — also called a duct blaster test — locates the points where duct air escapes, helping you implement the right sealing solution.

duct leakage test is simple, clean, and minimally invasive for residents. Most tests in Perkiomenville, PA require only 30 to 60 minutes, yet the upgrades can improve your home’s comfort and efficiency well into the future.

How to Measure Duct Leakage

Duct leakage is expressed in cubic feet per minute (CFM) per 100 square feet of the home’s conditioned area. Your technician uses a nanometer to sense slight pressure changes, showing precisely how much air is escaping through the ductwork. Understanding this number helps you uncover weak points, analyze opportunities for upgrades, and check whether your home follows local energy code requirements in Perkiomenville, PA.

Cost of Excessive Duct Leakage

If high utility expenses, irregular temperatures, or repeated HVAC troubles sound familiar, duct leakage might be the root cause. According to ENERGY STAR, many homes lose as much as 20% to 30% of conditioned air through duct leaks. Air entering from outside—whether warm or cold—makes your HVAC operate harder, causing energy costs to climb and comfort to decrease.

Overworked equipment also contributes to repeated breakdowns and pricey repairs. Proper duct sealing helps keep your HVAC system healthy over the long run, prolonging its lifespan and lowering continued maintenance needs.

Duct leaks can also pull in dust, mold spores, moisture, and numerous contaminants into the duct system. This can heighten allergy issues, compromise indoor air quality, and slowly cause expensive structural damage behind walls or ceilings.

How to Properly Seal Ductwork in an Old Home

The 2015 IRC/IECC requires that all new homes feature fully sealed duct systems utilizing updated, energy-efficient materials like mastic, foil tape, and insulation. But what happens when leaks are trapped deep inside wall or ceiling cavities?

Aerosol sealing technology (AeroSeal) allows technicians to seal leaks located inside inaccessible parts of ductwork. To set up this method, all vents are sealed off except for a single access point. The HVAC system is isolated, and a machine is fitted to the duct system. It pressurizes the ducts and releases a fine sealant mist that finds and fills small holes that traditional sealing methods cannot access.

This method performs well for small and medium leaks. However, larger openings typically require manual sealing with mastic and tape. Technicians complete before-and-after duct leakage tests to measure leakage reduction and ensure the aerosol sealing was effective.

Common Areas of Duct Leakage

The most common area where ducts leak air is around the joints. Ductwork uses several metal parts pressed together with tight fittings and metal bands, though these points are rarely airtight.

As your HVAC system regulates temperatures through the seasons, the ducts expand when heated and contract when cooled. Over time, this movement loosens the joints, causing gaps and leaks — which is why both new and older homes in Perkiomenville, PA should consider a duct leakage test.

Many energy auditors check duct leakage by feeling around the ducts and using a small tool to test the width of gaps between joints. If your duct system was not sealed with mastic and approved tape, there’s a high likelihood that air is leaking.

What Is an Acceptable Amount of Duct Leakage per Energy Code?

To achieve a passing duct leakage result, your system must read under 4 CFM per 100 square feet with the air handler installed, or 3 CFM per 100 square feet without the air handler. For new construction, a passing duct leakage test is a required step before final occupancy certification can be awarded.

If your home in Perkiomenville, PA is unable to pass a duct leakage test, you are probably spending too much on heating and cooling — while your HVAC equipment endures long-term stress. Meeting the 3–4 CFM requirement is important not just for compliance, but for safeguarding your home’s comfort and long-term energy efficiency.

Your technician will also recommend effective ways to fix leakage issues so you can earn a passing score, save on utilities, and improve home performance.

Local Energy Audits — affordable duct leakage test in Perkiomenville, PA

Local Energy Audits is honored to serve customers in Perkiomenville, PA and all surrounding areas. We specialize in revealing duct leakage and energy inefficiencies through blower door and duct leakage test. Whether your project is new or existing, we’re here to assist.
If you’d like to schedule a test, call us during business hours or contact us online to request an appointment.